12
13
Excavator Systems
1D, 2D and 3D excavating systems
Fast return on your
investment
With the single slope system from Leica
Geosystems you do not need to use a laser.
The cutting depth is directly presented on the
control box display in the cabin.
The 1D excavator system uses three
inclinometer sensors mounted on the boom,
stick and bucket. The sensor on the stick also
has a built-in laser receiver.
The system is reset by means of a laser
plane or a physically defined reference height,
e.g. a grade bar or curb stone height. The
desired depth and slope are entered into
the control box.
With this system, you only work with a
one-direction slope. The arrows on the display
will indicate whether you are too low, too high
or ”on-grade”. This information is also given
by means of an audible signal, while the LED
screen also displays the level in metric units
or US feet.
DEPTH
Commonly used for
bases, foundations,
etc.
SLOPE
Set the desired slope
for the embankment.
PIPELAYING
Set the desired depth
and slope of the pipe
trenches.
GRADING WORK
Set the right depth
and the desired tilt in
one direction.
LASER REFERENCE
Offers the possibility
of using rotating laser
as a reference.
HEIGHT ALERT
An audible signal
warns the operator if
the defined limit is
exceeded. Useful
around bridges and
overhead lines.
1D excavating system functions
Easy-to-use graphical
display
Short learning curve
thanks to smart menus
Robust and reliable construction
iCON excavate
iXE1, 1D excavating system
UNDERWATER WORK
The bucket motion
is shown on the
graphical display.
GRADIENT
In the longitudinal
direction.
